SVS Prime Wireless Pro, Руководство пользователя

Страница: 16 / 31

Note: An active High Pass Filter at 80Hz is automatically applied to the speaker’s output when the subwoofer
connection is detected.
3. We recommend setting the Low Pass Filter on the subwoofer to 90Hz.
4. Adjust the gain (volume) on the subwoofer to blend based on your personal preferences.
5. You can also connect your subwoofer wirelessly to your Prime Wireless Pro Powered Speakers
with an optional SVS SoundPath Tri-Band Audio Adaptor
Setting Up Custom Presets
A unique feature of the Prime Wireless Pro Powered Speakers is the six custom presets that give you instant access via
WiFi to your favorite music service playlists, Internet Radio stations and streaming music services that exist within the
DTS Play-Fi app without needing a phone or tablet.
You can also create a preset for any source that is connected to your Prime Wireless Pro Powered Speakers through
HDMI, Optical, or Line-in (such as a TV or gaming console).
Once they are set up, simply use the remote control or walk up to your Prime Wireless Pro Powered Speakers, push the
numbered button to start a preset, and your favorite music will start playing.
Creating Presets:
1. From the Play-Fi app, start the streaming service playlist or station you want to program as a
preset.
2. Determine which numbered preset button you want to program (1-6)
3. Press and hold the desired preset button on the front of the unit or the remote control until the
OLED display flashes [Saving Preset “X”].
a. The OLED display will confirm the preset is programmed with [Preset “X” Saved]
b. When setting up certain music services as presets, the Play-Fi app will ask you to sign
into your account first and the service may require a confirmation code. The app will
guide you through the process before the OLED display confirms that the preset has
been set.
NOTE: It sometimes takes a few seconds for the preset to connect to the music services over your WiFi network. This
delay is completely normal.
4. Follow the instructions above for the remaining five presets as desired.
5. To program a preset for a wired source (HDMI, Optical, Line-in), select that source using the left
control knob on the front of the Prime Wireless Pro Powered Speakers or on the remote control.
Then follow steps 2-3 above.