82
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
The data status field indicates with a darkened X that it is disabled. When
this parameter is enabled and blinkers, this means that there is nothing
connected to the data input. When this field alternates the value between
‘g’ and ‘G’, it means that it is trying to get the GPS satellites. If the ‘G’ does
not vary, then it is connected to the satellites.
4.3
GPS transmitter screen
So as to access to the GPS screen, go to the encoder option in the menu.
Once inside this option, go to the Data field and choose GPS. Press the OK
button and then the GPS screen appears.
Next the different fields meanings are shown:
Figure 4.3 GPS transmitter screen
Longitude of the HENM-70:
It specifies the longitude position of the
device.
Speed of the HENM-70:
It shows the speed of the device in knot.
Direction of the HENM-70:
The direction of the device is shown in this
field.
Latitude of the HENM-70:
It specifies the latitude position of the
device.
Height of the HENM-70:
The height of the device from ground is
specified in this value.
Satellite Level:
The level of each satellite signal received is shown in
this field.
Date:
The updated date is shown.
#--º--.---´ ---k ---º
#---º--.---´ -----mt
Satellite Level --/--/--
--:--:--
Level of the satellite signals
Time
Date
Height (meters)
Speed(knot)/
Direction(degrees)
Longitude of the
HENM-70
Latitude of the
HENM-70
