SVP HENM-70, Руководство пользователя

Страница: 115 / 138

108
HENM-70 Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
5.2.5.1 LEDs Status (reading parameters)
- ON/OFF:
o
If the Led is off the equipment is not being fed.
o
The Led lights up in green when the equipment is turned on.
- RF:
o
If the Led is off the equipment does not transmit RF signal.
o
The Led lights up in green when the equipment transmits RF
signal, RF stage is active.
- ALARM:
o
The LED lights up in red when any alarm occurs.
o
The different alarms that can appear in the device are:

Voltage High.

Voltage Low.

Temperature High.

ASI Overflow.
o
The different warnings that can appear in the device are:

No Video Input.

No GPS.
- STATUS:
The LED lights up when a change in the configuration of the device is
being processed.
5.2.5.2 Alarms (reading parameter)
In this option, different alarms which are present in the device are shown.
The different alarms that can appear in the device are:
- Voltage High.
- Voltage Low.
- Temperature High.
- ASI Overflow:
this alarm means that the input bitrate is higher than the one that can
be modulated due to the parameters configured (constellation, FEC,
GI...).
The different warnings that can appear in the device are:
- No Video Input.
- No GPS.