SVP HENM-70 Скачать руководство пользователя страница 67

Страница: 67 / 138

HENM-70

Encoder & DVB-S2/S Modulator

USER’S MANUAL V5.6

So as to introduce the key in the

BISS-1 option

, follow these steps:

Choose the BISS-1 option in the Mode field.

Go one field down (SW) and press the OK button so as to be allowed

to introduce the key.

With Left and Right buttons select one field and with UP, Down

buttons choose one value from 0 to 9 or A to F.

Press the OK button to set the key.

So as to introduce the key in the

BISS-E option

, follow these steps:

Choose the BISS-E option in the Mode field.

Go one field down (SW) and press the OK button so as to be allowed

to introduce the key.

With Left and Right buttons select one field and with UP, Down

buttons choose one value from 0 to 9 or A to F.

Press the OK button to set the key.

Go another field down (User) and press OK button so as to be allowed

to introduce the User.

With Left, Right buttons select one field and with UP and Down

buttons choose one value from 0 to 9 or A to F.

Press the OK button to set the User.

The BISS encryption is activated in the modulator and in the ASI output.

3.5.2.3

Modulator Menu

By using the Up, Down arrow keys, select the

Modulator

option

and press

the OK key.

Figure 3.36 Modulator Menu

MODULATOR

DVB-S2

>DVB-S

Содержание HENM-70











































































































































Результаты поиска

Содержание HENM-70

Отзывы:

Похожие инструкции для HENM-70

Бренды по названию

Популярные бренды

SVP HENM-70, Руководство пользователя

Результаты поиска

Содержание HENM-70

Отзывы:

Похожие инструкции для HENM-70

Бренды по названию

Популярные бренды