76
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
3.5.2.5.5
Firmware
Figure 3.44 Firmware Menu
Line nº
Function
1
Update Firmware:
This field is the one for updating the version of the device. So as to
update the equipment properly, follow the instructions below.
2
Restore Default:
In this option, the equipment is restored to the first factory version.
So as to restore the equipment to the initial set up, press the OK
button.
3
Rev:
In this field it is shown the number of the version installed in the
device. The characters which describe the number of the version are
the one inside the red box shown in the figure above. The rest of the
characters are important for the manufacturer but are not important
for the user.
Table 3.29 Firmware menu options
Update Firmware
Restore Default
Rv:v5.3501351916-18
Number of the version of the device
