SVP HDT-02 Скачать руководство пользователя страница 55

Страница: 55 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

Profile

(editable parameter)

In this field, the codification profile can be configured. To select
the desired profile, press Right, Left arrows buttons.

The available options are:

•

4.2.0

•

4.2.2

GOP

(eligible parameter)

In this field, the group of figures parameter is displayed. It
specifies

the order in which

intra-

and

inter-frames

are arranged.

The available options are:

•

Auto

•

Manual (editable parameter)

Level:

In this field, the level of the H.264 encoder can be configured.
The available options are:

•

4.0

•

4.1

•

4.2 (only available in 1080p-50/59.94/60 Hz video
formats)

Table 4.8: HDMI Input menu options

When HDMI video input is selected, it is necessary to specify the format

(1080p, 1080i, 720p). If other video input (SDI, CVBS or ASI) is

selected, then the Transmitter automatically captures its format and

the frame rate. If the video format is changed, the time detection of
this new format is less than 15 seconds.

Содержание HDT-02










































































































































































































































Результаты поиска

Содержание HDT-02

Отзывы:

SVP HDT-02, Руководство пользователя, Страница: 55 / 233

Результаты поиска

Содержание HDT-02

Отзывы: