SVP HDT-02 Скачать руководство пользователя страница 120

Страница: 120 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

120

Select MSK option and set the Subnet Mask address.

To change the

Subnet Mask address first press OK button and then, with the Up,
Down keys select the desired number. To change from one character

to another, press Right, Left keys. Press the OK button to save the

introduced value.

Figure 6.3: Subnet Mask

Select GAT option and set the Gateway address.

To change the

Gateway address first press the OK button and then, with the Up,
Down keys select the desired number. To change from one character

to another, press Right, Left keys. Press the OK button to save the
introduced value.

Figure 6.4: Gateway

Select Admin Pass option and set the administrat

or’s password. T

access to the Webserver directly without setting any password, the

Admin Pass must be set to 0 (00000000). However, if you want to set
an administ

rator’s password, it is necessary to introduce 8 digits. In

this way, with this password, the administrator can access to the

Webserver and make any configuration, modification or monitoring.

Figure 6.5: Admin Pass

Содержание HDT-02










































































































































































































































Результаты поиска

Содержание HDT-02

Отзывы:

SVP HDT-02, Руководство пользователя, Страница: 120 / 233

Результаты поиска

Содержание HDT-02

Отзывы: