SVP HDT-02 страница 202 Скачать руководство пользователя

Страница: 202 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

202

A.3.2

Alarms

If there is an alarm,

the alarm type is indicated by the amplifier’s

LEDs. The

LED will blink in different time sequences to indicate which alarm is present

on the device.
The different alarms related to the PA amplifier are indicated by the

sequences indicated below.
On the

ALARM

LED:

•

Forward Power Alarm:

There is not direct power or it is very low. The

alarm sequence starts with one small blink followed by one longer blink.

•

Reverse Power Alarm: The reverse power is too high, please check the

antenna connectors and cables. The alarm sequence starts with 2 small

blinks followed by one longer blink.

•

Voltage Alarm: The voltage is too high or too low, please check POWER

DC LED. The alarm sequence starts with 3 small blinks followed by one
longer blink.

•

High Temperature Alarm: The temperature is too high. The alarm

sequence starts with 4 small blinks followed by one longer blink.

On the

POWER DC

LED:

•

While the LED is continuously ON in green, there is no alarm.

•

If the LED blinks slowly, the input power is below the DC power supply

range.

•

If the LED blinks fast, the input power is above the DC power supply
range.

•

When the LED remains switched off for long, but sometimes blinks. It
means that the amplifier has been switched off remotely by the HDT-02

or by the RTC-01/RT-02 Remote Controls.

Anyway, when the

POWER DC

LED is on, the amplifier is powered.

HIGH TEMPERATURE

Protection:

The amplifier, as protection against overheating, checks the operation of

the fans. In this way we protect the amplifier from breakage by
overheating. The alarms for breakage of fans will behave as follows:

•

If one fan stops working, High Temperature alarm is displayed on both

the transmitter and the ALARM LED of the amplifier.

•

If the two fans stop working, as a protection measure the amplifier will

turn off

automatically, to avoid any overheating.

Содержание HDT-02










































































































































































































































Результаты поиска

Содержание HDT-02

Отзывы:

Похожие инструкции для HDT-02

Бренды по названию

Популярные бренды

SVP HDT-02, Руководство пользователя

Результаты поиска

Содержание HDT-02

Отзывы:

Похожие инструкции для HDT-02

Бренды по названию

Популярные бренды