SVP HDT-02, Руководство пользователя, Страница: 38 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 38
4.2 LEDs
The HDT-02 Transmitter has 5 LEDs on its front panel that show the
information detailed below.
Figure 4.6: HDT-02 front panel LED indication
The ON/OFF provides the following information:
• If the LED is off, the equipment is not being fed.
• If the LED flickers in red, the equipment is being fed but it is turned off.
• The Led lights up in green when the equipment is turned on.
The RF LED provides the following information:
• If the LED is off, the equipment does not transmit RF signal.
• The LED lights up in green when the equipment transmits RF signal, RF
stage is active.
The ALARM LED provides the following information:
• The LED lights up in red when any alarm occurs.
• The different alarms that can appear in the Transmitter are:
▪
Voltage High.
▪
Voltage Low.
▪
Temperature High.
▪
ASI Overflow: This alarm means that the input bitrate is higher
than the one that can be modulated due to the configured
parameters (constellation, FEC, GI...).
• The different warnings that can appear in the Transmitter are:
▪
No SDI/HDMI/CVBS/ASI Input.
▪
No GPS.
▪
No KLV.
The REMOTE LED provides the following information:
• The LED lights up in blue when the user is connected remotely to the
device (through the Web Server).
The STATUS LED provides the following information:
• The LED lights up when the encoder is working properly.
ON/OFF
RF
ALARM
REMOTE
STATUS