SVP HDE-70, Руководство пользователя

Страница: 97 / 124

90
HDE-70 H.264 – 4:2:2 – 10 bits Decoder
MANUAL V6.9
First of all, the status of the different LEDs available is presented. These
LEDs provide specific information about the status of the receiver:

ON/OFF:
The Led lights up in green when the equipment is turned on and it
turns up in red if the equipment is turned off.

ALARM:
The Led lights up in red when any alarm occurs.

REMOTE:
The Led lights up in green when the user is connected remotely to
the device.

STATUS:
The Led lights up when a change in the configuration of the device is
being processed.
Configuration
- Standby Mode:
In this option HDR-106 receiver will be in standby or in ON mode.
- Timeout Reset:
In this field the time that the receiver could be without receiving any
signal is selected. After passing this time, the equipment is reset. To
disable this option, 0 value must be written. (editable parameter)
- Webserver IP:
In this field, the IP address for the Webserver connection can be
configured. (editable parameter)
- Webserver Subnet:
In this field, the Subnet address for the Webserver connection can be
configured. (editable parameter)
- Webserver Gateway:
In this field, the Gateway address for the Webserver connection can
be configured. (editable parameter)
- Webserver MAC:
In this field, the MAC address of the device is shown. (reading
parameter)