SVP HDE-70 Скачать руководство пользователя страница 11

Страница: 11 / 124

HDE-70

H.264 – 4:2:2 – 10 bits Decoder

MANUAL V6.9

Chapter 1: Introduction

The new HDE-70 features H.264 and MPEG-2 decoding for high definition

(HD) and standard definition (SD) signals. H.264 compression makes
possible HD signal transmission and reception using 40% lower bitrate than

conventional MPEG-2 systems. Moreover, HDE-70 works in 4:2:2 with 10

bits.

This device decodes input TS signals of up to 320 Mbps and offers the
highest video quality with minimum end to end latency available in the

market, 33ms. For added security, encrypted transmitted signal can be

decrypted using BISS or AES decryption technology.

It features Video over IP and remote control via the Ethernet port. So, this
decoder provides a choice of IP or ASI network interfaces allowing

deployment of services over IP networks or traditional video networks.

The HDE-70 has been designed to be 1U rack mountable.

SVP has reached the state of the art and the HDE-70 decoder has been

designed to be used in broadcast, security and military applications.

Содержание HDE-70





























































































































Результаты поиска

Содержание HDE-70

Отзывы:

Бренды по названию

Популярные бренды

SVP HDE-70, Руководство пользователя

Результаты поиска

Содержание HDE-70

Отзывы:

Бренды по названию

Популярные бренды