SVP HDE-70, Руководство пользователя

Страница: 20 / 124

13
HDE-70 H.264 – 4:2:2 – 10 bits Decoder
MANUAL V6.9
3.5 LEDs
The HDE-70 decoder has 4 Leds on its front panel that show the information
detailed below.
The
ON/OFF provides the following information:

If the Led is off, the equipment is not being fed.

If the Led flickers are red, there is power into the equipment but it is
turned off.

The Led lights up in green when the equipment is turned on.
The ALARM LED provides the following information:

The Led lights up in red when any alarm occurs.

The different alarms that can appear in the device are:
- Input Signal Not Present
- No Video Present
- DC Voltage Low
- DC Voltage High
- High Temperature
The REMOTE LED provides the following information:

The Led lights up in green when the user is connected remotely to the
device.
The
STATUS LED provides the following information:

The LED lights up when a change in the configuration of the device is
being processed.
Figure 3.6 HDE-70 LEDs
ON/OFF LED
ALARM LED
REMOTE LED
STATUS LED