SPM100 User guide
Index
1. Welcome
2. Features
3. Content
4. Hardware
5. Remote Control
6. TV Connections
6.1 AV Connection
6.2 HDMI Connection
7. USB device connection
8. Playback from card reader
9. First time usage
9.1 Starter Screen
10. Main Menu
10.1 Movie
10.2 Music
10.3 Photo
10.4 Slide
10.5 File
11. Setup menu
12. Basic operations
13. Firmware upgrading
14. FAQs
15
English
6. TV Connections
SPM100 includes Composite analog video output (AV) and HDMI digital audio and video output. Please note each output
has different resolution, choose the audio and video output you prefer depending on your TV. If you want to enjoy high de-
finition signal with up to 1080i of resolution, please connect the device through HDMI output.
6.1 AV Connections
Connect the device to the TV as shown in the picture. Then, connect the power adaptor to the power outlet, select the
AV input in you TV and wait during the system loading process.
If you want to enjoy multichannel audio output, connect the device to a multichannel sound system through Coaxial out-
put (cable provided).
Coaxial Connection
6.2 HDMI Connection
Connect the device to your TV as shown in the picture. HDMI output includes audio and video signal in the same cable.
Connect the power adaptor to the power outlet, select the HDMI input in your TV and wait during system loading process.
Connect the device to a multichannel speaker system to enjoy 5.1 audio signal through Coaxial audio output (cable pro-
vided).
7. USB device connection
SPM100 plays files from any external USB storage device. Follow these steps to connect an external USB device to the
SPM100:
1. Connect the external USB storage device to the USB
Host port located in the side panel of the unit. It is pos-
sible your external device needs extra power supply, in
this case please connect the power adaptor of the ex-
ternal device.
2. Turn the external storage device on and wait until the
SPM100 scans its content. This process may take
some seconds. Then, if the external storage unit has
more than one partition, the partition will be displayed.
Select the partition which contents the files you want to
play, press "Enter" button of the remote control and wait
until a menu will appear. If you want to change the par-
tition, go to Main Menu and press "Exit" button.
