ENG
5
MS-1821
User Manual
Remote control
a
MUTE: sound on/off
b
USB/SD: MP3 player mode switch-on button (playing MP3
files from an USB/SD card*
c
BT: BT mode on button
d
TUNE+/-: manual band scanning (in the Tuner mode)
e
CH-/
: previous track (pressed short in the Player mode);
Previous station* (pressed short in the Tuner mode);
Rewind the track in USB/SD mode (pressed long)
f
EQ+/-: equalizer mode selection button (in the Player and
BT mode)
g
0-9: numeric pad
h
REPEAT: Player operation mode selection
i
FM: enter the Tuner mode
j
AUX: AUX input selection button
k
: Play/Pause (in the Player mode);
Disconnection of BT
l
CH+/
: next track (pressed short in the Player mode)
Next station* (pressed short in the Tuner mode);
Rewind the track in USB/SD mode (pressed long)
m
AUTO: start auto scanning and memorizing stations in FM
band (in the Tuner mode)
n
VOL+/-: volume control
o
SAVE: memorize selected frequency (in the Tuner mode)
p
RESET: return to default settings
Battery Installation
•
Open the battery compartment on the back of the remote
control
•
Insert the included AAA batteries
•
Close the battery compartment
Notes. Use the RC at an angle no more than 30° at a distance
of no more than 7 meters. Direct the remote control to the in
-
frared receiver
g
on the subwoofer. If the remote control does
not operate, check the batteries or replace the discharged bat-
teries with new ones. Remove the batteries from the RC if you
don’t intend to use it for a long time (more than one week).
* The storage device must be formatted as FAT, FAT32. Memory cards SDHC class 10 or less can
be used. Connecting devices other than USB flash drive is not recommended. Connection of
HDDs and other devices can cause damage to the MSS.
** The frequencies are switched if there are stations preset in the memory.
