ENG
7
MS-1821
User Manual
•
Connect the subwoofer to the mains outlet with the power cord
q
.
•
Turn on the MSS power supply using the ON/OFF switch (
p
, ON) on the subwoofer rear panel.
«AUX» title will be displayed on the LED display
a
.
•
Select a signal source using the MODE
h
button on the control panel or remote control buttons:
USB/SD
b
, BT
c
, AUX
j
, FM
i
.
•
Adjust the master volume as desired with VOL-
b
and VOL+
c
buttons on the control panel or
with the VOL+/-
n
button on the remote control.
•
Select the desired LF/HF timbre level using BASS+/-
f
and /-
e
knobs on the control
panel.
•
To listen to the radio, connect the antenna to the FM ANT
k
jack and adjust it for better
reception.
•
After using the MSS, mind to switch it off using the ON/OFF switch (
p
, OFF position) and unplug
the power cord
q
from the socket.
6. OPERATION MODES
Player Mode
•
The system will automatically enter the Player mode when a USB device is connected to the
USB port
d
or an SD card is inserted into the corresponding slot
j
; or press the MODE
h
button on the front panel or the USB/SD
b
button on the remote control. The display
a
will
show the selected mode, then the number of the tracks found and the number of the track
played. The files will automatically start playing.
•
To select the track, you can enter its number on the remote control using the numeric pad
buttons
g
. The display
a
will show sequence number of a track.
•
You can select a playback mode using the remote control REPEAT
h
button («ONE» – repeat
the playing track; «RND» – play random tracks; «ALL» – play all tracks available).
•
In the Player mode, Equalizer feature is available. To select a preset mode, use the EQ+ and
EQ-
f
buttons on the remote control.
Bluetooth Mode
•
For the signal transmission in this mode it is necessary first to interconnect the MSS with
a signal source (
see connection diagram in Fig. 4). For this press the button MODE
h
on the
control panel or button BT
c
on the remote control. After 2-3 seconds, the speaker will go into
search mode, and the display
a
will be flashing red «bt». It is necessary to select the search
mode of devices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.).
Massage will be displayed on the screen which is to be connected to**.
•
If the connection is successful, you will hear the system sound, and on display
a
the inscription
«bt» will have a constant glow.
* The MSS operation may be incorrect if an SD card of 512 Mb capacity or lower is used. If a USB
flash device of 8 Gb capacity or more is used, command processing time may be extended.
** You might have to enter «0000» code to connect some models of devices via Bluetooth.
•
To connect the MSS to a PC, МР3/CD player, use a 2RCA to mini-jack signal cable (included).
Insert the RCA jacks of the signal cable into the L
l
and R
m
jacks of the INPUT, and the mini-
jack of the signal cable – into the LINE OUT port of your PC sound card or an audio output of
your МР3/CD player.
•
To connect the MSS to a TV or DVD/CD player, use a 2RCA to 2RCA signal cable (not included).
Insert the RCA jacks of the signal cable into the L
l
and R
m
jacks of the INPUT, and the other
RCA jacks – into your TV or DVD/CD player audio output jacks, as shown in Fig. 4.
Note. Check the reliable fixation of wires in the terminals, polarity of connection and absence
of contact of the bared wires with each other and the metal parts of the hardware.
