Sven GC-W400, Руководство по эксплуатации

Страница: 21 / 22

ENG
Operation Manual
21
GC-W400
8. TROUBLESHOOTING
Problem
After installation of the software,
game controller does not work
normally.
Motors have no vibration
function in a racing game.
After entering game, some
analog axis will automatically
operate.
After entering the game,
vibration feedback operates
automatically.
During the game vibration
feedback is insu cient.
Solution
. Check whether the controller s link cable is strongly
connected to PC.
B. Make sure that status indication for Game Controller
after
installation is Con rm.
C. Check whether controller s settings have no con icts with
other peripherals settings.
D. Restart your PC, if the controller still doesn t work
normally.
After exiting the game, disconnect the controller from the
USB port and connect it again. If it still can t work normally,
please restart the computer.
The steering wheel hasn t been calibrated or hasn t been
con rmed after calibrations. Enter Option
–
Controllers
–
Dead Zone to adjust the range of the dead zone, and make
sure the axes are in the range of the dead zone.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set force of feedback.
If none of the above mentioned solutions removes the problem, please refer to nearest authorized
service center for consultation by quali ed specialist. Never try to repair the device on your own.
Dead Zone Effect Zone Effect Zone
Axes
Axes