Modular UPS 25KVA~900KVA User Manual 37
UPS and Module Control Panel
z
Select triangle of
highlighted:
Battery information is presented in the Digit Displays Area: battery negative
voltage, battery negative charge/discharge current and bus negative voltage.
z
highlighted
：
Fault and warning codes are shown in Digit Displays Area in recycle (shown with
short dash when less than 3).The meanings of the codes are listed in Table 4.2.
z
flashing
：
Indicating a fault occurs.
z
Energy bar of
：
(a) Flashing: Rectifier soft start;
(b) Highlighted: The rectifier is working normally;
(c) Off: Other situation.
z
Energy bar of
：
(a) Flashing: Inverter starting;
(b) Highlighted: Load on inverter;
(c) Off: Other situation.
z
Energy bar of
：
(a) Flashing: low battery voltage
；
(b) Highlighted: Charging normally;
(c) Off: battery not connected.
z
Energy bar of
:
(a) Lightened: Discharging mode;
(b) Off: battery not connected or charging.
Unit: Voltage (V), Current (A), Percentage (%).
When one power module is turning page, the other modules update within 2 seconds.
