SV 104IS USER’S MANUAL ______________________________________________________
56
5.5.8
Auto-Run settings (timer, pauses) tab
The
Timer
panel enables the user to program the internal real time clock to act as a delayed start and
stop timer. The instrument can be switched on by itself at the pre-selected programmed time and it can then
perform the measurement run, which was used before it was last switched off. Auto-run feature is useful
if you wish to pre-set the instruments to run and stop for a specific time period, such as a week long study.
Figure 5-18
Auto-run configuration tab
Selecting the mode of the timer function
The timer can be switched off
–
“Off”
, switched on only once
–
“Single”
, or switched on many times
regularly
–
“Regular”
In the Simple instrument interface mode the Timer position doesn’t appear in the
Measurement list.
In the case when the timer function is active (
“Single”
or
“Regular”
) and the instrument is switched
on the Time screen appears until the programmed measurement runs are finished.
Enabled:
Pause and Timer
mode of operation
