Suzuki SX4 2016 Скачать руководство пользователя страница 307

Страница: 307 / 504

5-57

OTHER CONTROLS AND EQUIPMENT

83RM0-01E

Display change

Press “DISP” button (6).

Each time the button is pressed, display

will change as follows:

NOTE:

• “NO TITLE” will be displayed when there

is no text information in the disc currently

being played.

• If text data contains more than 16 char-

acters, “>” mark will appear at the right

end. Holding down “DISP” button (6) for

1 second or longer can display the next

page.

Notes on MP3/WMA/AAC

What is MP3?

• An abbreviation of “MPEG audio layer3”,

MP3 is an audio compression format

that has become the standard format

among PC users. Its merit is that the

original audio data is compressed to

approximately 1/10 and high sound qual-

ity is maintained. This means that it is

possible to store the data of approxi-

mately 10 music CDs on a single CD-R/

RW disc, which in turn makes it possible

to play music for a long time without hav-

ing to change the disc.

What is WMA?

• An abbreviation of “Windows Media

Audio,” WMA is an audio compression

format developed by Microsoft.

• WMA files for which the DRM (Digital

Rights Management) function is on can-

not be played.

• Windows Media

and the Windows

logo are trademarks or registered trade-

marks of Microsoft Corporation in the

United States and other countries.

What is AAC?

• An abbreviation of “Advanced Audio

Coding,” AAC is an audio compression

format used by MPEG2 and MPEG4.

Points to remember when making MP3/

WMA/AAC files

Common

• High bit rate and high sampling fre-

quency are recommended for high qual-

ity sounds.

• Selecting VBR (Variable Bit Rate) is not

recommended. Selecting VBR may

cause display of incorrect playing time

and jumpiness of playback.

• Playback sound quality varies depend-

ing on the encoding environment. For

details, refer to the user manual of the

encoding software and the writing soft-

ware in use.

Play time

Folder name

File name

Album name (MP3, AAC only)

Track title

Artist name

NOTICE

Never use “.mp3”, “.wma” or “.m4a”

as a file name extension if it is not in

the MP3/WMA/AAC format file. Fail-

ure to observe this may result in

damage to the speaker due to noise

production.

Содержание SX4 2016

























































































































































































































































































































































































































































































































Результаты поиска

Содержание SX4 2016

Отзывы:

Похожие инструкции для SX4 2016

Бренды по названию

Популярные бренды

Suzuki SX4 2016, Руководство пользователя

Результаты поиска

Содержание SX4 2016

Отзывы:

Похожие инструкции для SX4 2016

Бренды по названию

Популярные бренды