Suzuki SX4 2016 Скачать руководство пользователя страница 310

Страница: 310 / 504

5-60

OTHER CONTROLS AND EQUIPMENT

83RM0-01E

Selecting a USB device mode

Press “USB” button (1).

Each time the button is pressed, the mode

will change as follows:

Selecting a folder

Turn “TUNE/FLD PUSH SOUND” knob (2)

to select the desired folder.

Selecting a track

• Press UP button (3) to listen to the next

track.

• Press DOWN button (4) twice to listen to

the previous track.

When DOWN button (4) is pressed

once, the track currently being played

will start from the beginning again.

Fast forwarding/rewinding a track

• Hold down UP button (3) to fast forward

the track.

• Hold down DOWN button (4) to fast

rewind the track.

Random playback

Press “RDM” button (6).

Each time the button is pressed, the mode

will change as follows:

• FOLDER RANDOM

The random indicator “F.RDM” will light.

The tracks in the currently selected

folder will be played in random order.

• ALL RANDOM

The random indicator “RDM” will light.

The tracks in the connected USB device

will be played in random order.

Repeat playback

Press “RPT” button (5).

Each time the button is pressed, the mode

will change as follows:

• FILE REPEAT

The repeat indicator “RPT” will light.

The track currently being played will be

played repeatedly.

• FOLDER REPEAT

The repeat indicator “F.RPT” will light.

All the tracks in the folder currently

selected will be played repeatedly.

Display change

Press “DISP” button (7).

Each time the button is pressed, display

will change as follows:

NOTE:

• “NO TITLE” will be displayed when there

is no text information in the disc currently

being played.

• If text data contains more than 16 char-

acters, “>” mark will appear at the right

end. Holding down “DISP” button (7) for

1 second or longer can display the next

page.

USB (iPod

) (if equipped)

Bluetooth

audio (if equipped)

OFF FOLDER RANDOM ALL RANDOM

OFF FILE REPEAT FOLDER REPEAT

Play time

Folder name

File name

Album name (MP3, AAC only)

Track title

Artist name

Содержание SX4 2016

























































































































































































































































































































































































































































































































Результаты поиска

Содержание SX4 2016

Отзывы:

Похожие инструкции для SX4 2016

Бренды по названию

Популярные бренды

Suzuki SX4 2016, Руководство пользователя

Результаты поиска

Содержание SX4 2016

Отзывы:

Похожие инструкции для SX4 2016

Бренды по названию

Популярные бренды