1-4 GENERAL INFORMATION
!
WARNING
* Proper service and repair procedures are important for the safety of the service mechanic and
the safety and reliability of the motorcycle.
* When 2 or more persons work together, pay attention to the safety of each other.
* When handling toxic or flammable materials, make sure that the area you work in is well-venti-
lated and that you follow all of the material manufacturer’s instructions.
* Never use gasoline as a cleaning solvent.
* After servicing the fuel, oil, exhaust or brake systems, check all lines and fittings related to the
system for leaks
CAUTION
* If parts replacement is necessary, replace the parts with Suzuki Genuine Parts or their equiva-
lent.
* When removing parts that are to be reused, keep them arranged in an orderly manner so that
they may be reinstalled in the proper order and orientation.
* Be sure to use the special tools when instructed.
* Make sure that all parts used in reassembly are clean. Lubricate them when specified.
* Use the specified lubricant, bond, or sealant.
* Whenever you remove oil seals, gaskets, packing, O-rings, locking washers, self-locking nuts,
circlips and certain other parts as specified, be sure to replace them with new ones. Also,
before installing these new parts, be sure to remove any left over material from the mating
surfaces.
* Never reuse a circlip. When installing a new circlip, take care not to expand the end gap larger
than required to slip the circlip over the shaft. After installing a circlip, always ensure that it is
completely seated in its groove and securely fitted.
* Use a torque wrench to tighten bolts/nuts to the specified torque. Wipe off grease and oil if a
thread is smeared with them.
* After reassembling, check parts for tightness and proper operation.
* Use special tools where specified.
* To protect the environment, do not unlawfully dispose of used motor oil and other fluids.
* To protect Earth’s natural resources, properly dispose of used motorcycle and parts.
Содержание RM 250 2003
