Suzuki RM 250 2003, Руководство по эксплуатации для владельца

Страница: 173 / 225

16-4 REAR SUSPENSION
REBOUND DAMPING FORCE ADJUSTMENT
• Turn the adjuster
1
clockwise until it stops (full hard position).
NOTE:
Do not force the adjuster past the stopped position, or you may
damage the adjuster.
• Turn the adjuster
1
counterclockwise the specified clicks so
that the punched mark
A
will be aligned with the punched
mark
B
.
"
Rebound damping force adjuster
Standard setting: 11 clicks turns out
SPRING PRE-LOAD ADJUSTMENT
• Place a block under the chassis tube.
• Remove the seat and right frame cover. (
!
3-2, 12-2)
• Remove the silencer.
• Loosen the air cleaner clamp screw.
• Remove the bolts and nut (right and left) and remove the rear
frame assembly.
• Loosen the lock nut
1
with the special tool.
#
09910-60611: Universal clamp wrench
• Turn the adjuster
2
clockwise or counterclockwise to change
the spring pre-load.
• Tighten the lock nut
1
.
"
Standard spring set length: 6.3 mm (0.24 in)
(Standard spring set length: 6.3 mm compressed from
spring free length)
Spring set length adjustable range: 2 – 12 mm
(0.08 – 0.47 in)
NOTE:
Turning the adjuster
2
without loosening the lock nut
1
can
damage the rear cushion unit.
• To remount the rear frame assembly reverse the sequence as
described.