Suzuki Movano Скачать руководство пользователя страница 76

Страница: 76 / 353

Storage

Tray

Press at the front to open.
Do not place any hard or heavy

objects on the tray.

Glovebox

Depending on the version, pull the

handle or press the button to open the

glovebox.
The glovebox should be closed whilst

driving.
On some versions the glovebox is

ventilated.
Glovebox cooler

222.

Cupholders

Cupholders are located at either end

of the instrument panel and centrally

in the lower instrument panel.

Press at the front to open.
Additionally, cupholders may be

located in the rear side of the front

centre passenger seat.
Folding passenger seatback

74.

Depending on model, cupholders

may also be located in the lower front

part of the rear seats.
The cupholders can also be used to

hold the portable ashtray unit

91.

Front storage

Depending on model, coat hooks or

storage nets may be located on the

cabin bulkhead.

Содержание Movano


































































































































































































































































































































































Результаты поиска

Содержание Movano

Отзывы:

Бренды по названию

Популярные бренды

Suzuki Movano, Руководство пользователя

Результаты поиска

Содержание Movano

Отзывы:

Бренды по названию

Популярные бренды