Suzuki Movano Скачать руководство пользователя страница 338

Страница: 338 / 353

336

Body conversions

Box body

Keys

The radio remote control only

operates the front door locks.
Additional keys are provided for the

load compartment door locks.

Doors

Side door

Unlock by turning the key under cover

(1) in the side door lock. Press button

(2) and fully extend door handle (3).

Pull the door handle to open door.

When closing, with the door handle

fully extended; push the door shut.
Push the handle back into the recess

and lock with the key to secure.

Rear doors

Opening

Unlock by turning the key under cover

(1) in the rear door lock. Press button

(2) and fully extend door handle (3).

Pull the door handle to open door.

The left-hand rear door is opened by

lifting the interior catch.

Содержание Movano


































































































































































































































































































































































Результаты поиска

Содержание Movano

Отзывы:

Бренды по названию

Популярные бренды

Suzuki Movano, Руководство пользователя

Результаты поиска

Содержание Movano

Отзывы:

Бренды по названию

Популярные бренды