33
CHOKE CABLE
Check the free play in the choke cable.
Choke cable play: 0.5–1.0 mm (0.02–0.04 in)
If the cable needs adjusting, use the following proce-
dure.
1. Loosen the lock nut
B
and turn the adjuster
A
to
obtain the correct free play in the choke cable.
2. Move the cable back and forth firmly to ensure that
the correct amount of free play is available and
that the cable housing is properly seated in the
adjuster
A
.
3. Tighten the lock nut
B
, and set the rubber boot
C
to correct position.
REVERSE LOCK RELEASE CABLE
Check the reverse lock release cable play at the
reverse lock release cable knob
A
.
Reverse lock release cable play:
1.0–2.0 mm (0.04–0.08 in)
If adjustment is necessary, carry out the procedure
below:
1. Loosen the lock nuts
B
.
2. Slide the adjuster
C
to obtain the correct play.
3. Tighten the lock nuts
B
while holding the adjuster
C
. Place the rubber boot
D
.
!
After adjustment, be sure to check for reverse
lock function.
