Suzuki LT-A50, Руководство по обслуживанию

Страница: 94 / 146

CHASSIS 5-23
Right angle
(90 deg.)
Right angle
(90 deg.)
Forward
TOE-IN ADJUSTMENT
Adjust the toe-in as follows:
• Place the vehicle on level ground and set the handlebars
straight.
Make sure all the tires are inflated to the standard pressure.
(
"
2-11)
• Place 30 kg (66 lbs) of weight on the seat.
• Loosen the locknuts (
1
,
2
) on each tie rod.
#
The locknuts
2
have left-hand threads.
• Measure the distances (
A
and
B
) between the front wheels.
Subtract the measurements of
A
from the measurements of
B
to find the toe-in. If the toe-in is not within specification, ad-
just the tie rod to the right or left until the toe-in is within the
specified range.
A
–
B
= Toe-in
$
Toe-in
Standard: 1.5 mm ± 3 mm (0.06 ± 0.16 in)
• Temporarily tighten the four locknuts.
• Check that the distances (
C
and
D
) are equal, as shown. If the
distances are not equal, adjust the tie rod to the right or left
until the toe-in is within specification. Check the toe-in again by
measuring distances
A
and
B
.
• If the toe-in is not within specification, repeat the adjustment as
above until the proper toe-in is obtained and distances
C
and
D
become equal.
• After adjustment has been made, tighten the four locknuts (
1
,
2
) to the specified torque.
!
Tie rod locknut: 29 N.m (2.9 kgf.m, 21 lb-ft)