Suzuki LT-A50, Руководство по обслуживанию

Страница: 51 / 146

ENGINE 3-21
• After the crankcase screws have been tightened, make sure
that the crankshaft, countershaft and driveshaft rotate smoothly.
• If their shafts do not rotate smoothly, try to free it by tapping
with plastic hammer.
GENERATOR ROTOR
• Install the generator stator
1
.
NOTE:
Apply a small quantity of THREAD LOCK “1342” to the threads of
the screws.
"
99000-32050: THREAD LOCK “1342”
• Fit the grommet
2
securely.
• Remove any grease from the tapered portion of the crankshaft
and also from the generator rotor.
• Install the generator rotor key
1
onto the crankshaft.
• Apply a small quantity of THREAD LOCK SUPER “1303” to the
threads of the generator rotor nut.
)
99000-32030: THREAD LOCK SUPER “1303”
• Hold the generator rotor using the special tool and tighten the
generator rotor nut to the specified torque.
'
09930-40113: Rotor holder
#
Generator rotor nut: 50 N.m (5.0 kgf.m, 36.0 lb-ft)
OIL GUIDE/BEARING RETAINER PLATE
• Install the oil guide/bearing retainer plate
1
.
• Apply a small quantity of THREAD LOCK SUPER “1303” to the
threads of the screws.
)
99000-32030: THREAD LOCK SUPER “1303”