BODY ELECTRICAL SYSTEM 8-15
Transmitter
Replacement of Transmitter Battery
If transmitter becomes unreliable, replace transmitter battery as
follows.
M13 Engine Model
1) Remove screw (1) and transmitter cover (2).
2) Remove transmitter (3) from transmitter holder (4).
3) Put edge of coin or flat blade screwdriver in slot of transmit-
ter (3) and by pry it open.
4) Replace the battery (lithium disc-type CR1616 or equivalent
battery) so its + terminal faces “+” mark on transmitter.
5) Fit together transmitter (3) and install it into transmitter
holder (4).
6) Install transmitter cover (2) and screw (1).
7) Make sure the door locks can be operated with transmitter.
K9K Engine Model
1) Put the edge of a coin (1) or a flat blade screwdriver in the
slot (2) of transmitter (3) and pry it open.
2) Replace battery (lithium disc-type CR 2032 or equivalent
battery) (4) so its + terminal faces the “+” mark of the trans-
mitter (3).
3) Close the transmitter (3) firmly.
4) Make sure the door locks can be operated with transmitter
(3).
CAUTION:
Use care not to allow grease or dirt to be attached on the
printed circuit board and the battery.
NOTE:
• To prevent theft, be sure to break the transmitter
before discarding it.
• Dispose of the used battery properly according to
applicable rules or regulations. Do not dispose of lith-
ium batteries with ordinary household trash.
1
3
4
2
3
4
1
3
2