6A2-42 ENGINE MECHANICAL (K9K ENGINE)
23) Apply sealant “A” to thread of TDC pin cap (1), and tighten
TDC pin cap as specified torque.
Tightening torque
TDC pin cap (a): 20 N·m (2.0 kg-m, 14.5 lb-ft)
“A”: RHODORSEAL 5661®
24) Install generator upper bracket support (1).
Tightening torque
Generator upper bracket support bolt (a):
21 N·m (2.1 kg-m, 15.5 lb-ft)
25) Install timing belt lower cover (1) hooking its tabs (2), and
install its plastic bolt (3).
26) Install timing belt upper cover (1) hooking its tabs (2).
27) Install CMP sensor (3).
Tightening torque
CMP sensor bolt:
8 N·m (0.8 kg-m, 6.0 lb-ft)
28) Install generator upper bracket (1) and injector cover (2).
Tightening torque
Generator upper bracket bolt (a):
40 N·m (4.0 kg-m, 29.0 lb-ft)
29) Install engine assembly to vehicle referring to “Engine
Assembly Removal and Installation” in this section.
NOTE:
When installing timing belt lower cover, position its tab
(4) into hole (5) of inner timing cover.
2
1
(a)