Suzuki DL1000A 2018, Руководство пользователя

Страница: 136 / 161

8-3
IGNITION SYSTEM CHECK
1. Remove the all spark plug
caps.
2. Remove the spark plugs and
reattach them to the spark
plug caps.
3. Put the engine stop switch in
the “

” position and the igni-
tion switch in the “ON” posi-
tion. While holding a spark
plug with its base firmly
against the engine, push the
electric starter switch. If the
ignition system is operating
properly, a blue spark should
jump across the spark plug
gap.
4. If there is no spark, clean the
spark plug. Replace it if neces-
sary. Retry the above proce-
dure with the cleaned spark
plug or a new one.
5. If there is still no spark, take
your motorcycle to an autho-
rized Suzuki dealer.
COMPLAINT: Engine Stalls
1. Make sure there is enough fuel
in the fuel tank.
2. If the meter indicates “FI”,
showing signs of trouble in the
fuel injection system, take your
machine to an authorized
Suzuki dealer. Refer to the
“INSTRUMENT PANEL” sec-
tion for an explanation of the
malfunction indicator.
3. Check the ignition system for
intermittent spark.
4. Check the idle speed. The cor-
rect idle speed is 1200 – 1400
r/min.

WARNING
Performing the spark test
improperly can be hazardous.
You could get a high voltage
electrical shock if you are not
familiar with this procedure.
Do not perform this check if
you are not familiar with the
procedure. Do not point the
spark plug near the spark plug
hole during this test. Do not
perform this test if you have a
heart condition or wear a pace-
maker.