Suzuki DL1000A 2018, Руководство пользователя

Страница: 58 / 161

4-3
Allow the Engine Oil to
Circulate before Riding
Allow sufficient idling time after
warm or cold engine start up
before revving the engine or plac-
ing the transmission in gear. This
allows time for the lubricating oil
to reach all critical engine compo-
nents.
Observe Your Initial and Most
Critical Service
The initial service (break-in main-
tenance) is the most important
service your motorcycle will
receive. During break-in opera-
tion, all of the engine components
will have mated together and
seated. Maintenance required as
part of the initial service includes
correction of all adjustments,
tightening of all fasteners and
replacement of dirty oil. Timely
performance of this service will
help make sure you get a longer
service life and the best perfor-
mance from the engine.
NOTE: The 1000 km (600 miles)
service should be performed as
outlined in the INSPECTION AND
MAINTENANCE section of this
Owner’s Manual. Pay particular
attention to the CAUTION and
WARNING messages in that sec-
tion.
INSPECTION BEFORE RIDING

WARNING
Failure to inspect your motor-
cycle before riding and to prop-
erly maintain your motorcycle
increases the chances of an
accident or equipment dam-
age.
Always inspect your motorcy-
cle each time you use it to
make sure it is in safe operat-
ing condition. Refer to the
INSPECTION AND MAINTE-
NANCE section in this owner’s
manual.

WARNING
If you operate this motorcycle
with improper tires or improper
or uneven tire pressure, you
may lose control of the motor-
cycle. This will increase your
risk of an accident.
Always use tires of the size and
type specified in this owner’s
manual. Always maintain
proper tire pressure as
described in the INSPECTION
AND MAINTENANCE section.