Suzuki DL1000A 2018, Руководство пользователя

Страница: 107 / 161

7-32
CLUTCH
10 – 15 mm
(0.4 – 0.6 in)
At each maintenance interval,
adjust the clutch cable play with
the clutch cable adjuster. The
cable play should be 10 – 15 mm
(0.4 – 0.6 in) as measured at the
clutch lever end before the clutch
begins to disengage. If you find
that the amount of clutch cable
play is incorrect, adjust it in the
following way:
1. Loosen the lock nut
1
.
2. Turn the clutch lever adjuster
2
clockwise as far as it will go.
3. Loosen the cable adjuster lock
nut
3
, and turn the cable
adjuster
4
to obtain approxi-
mately 10 – 15 mm (0.4 – 0.6
in) of free play at the clutch
lever end as indicated.
4. Minor adjustment can now be
made with the adjuster
2
.
5. Tighten the lock nuts,
1
and
3
, after finishing adjustment.
NOTE: Any maintenance of the
clutch other than the clutch cable
play should be performed by your
Suzuki dealer.
BRAKES
This motorcycle utilizes front and
rear disk brakes. Proper operation
of brake systems is vital to safe
riding. Be sure to perform the
brake inspection as scheduled.
NOTE: Operating in mud, water,
sand or other extreme conditions
can cause accelerated brake
wear. If you operate your motorcy-
cle under these conditions, the
brakes must be inspected more
often than recommended in the
MAINTENANCE SCHEDULE.
Brake Hose Inspection
Inspect the brake hoses and hose
joints for cracks, damage or brake
fluid leakage. If any defects are
found, ask your Suzuki dealer to
replace the brake hose with a new
one.

WARNING
Failure to properly inspect and
maintain your motorcycle’s
brake systems can increase
your chance of having an acci-
dent.
Be sure to inspect the brakes
before each use according to
the INSPECTION BEFORE
RIDING section. Always main-
tain your brakes according to
the MAINTENANCE SCHED-
ULE.