54
Start & Stop Switch
This is a switch to start and stop the engine.
The engine can be started with the remote con-
trol handle at the neutral position.
[
] (UP) & [
] (DOWN)
The “Power Trim and Tilt” is operated by press-
ing the switch. To tilt the motor up, press the
[
]
switch. To tilt the motor down, press the
[
]
switch.
NOTE:
The tilt up and tilt down switches cannot be acti-
vated when the power off.
REMOTE CONTROL BOX
Throttle Only Switch
This switch holds the shift position in neutral,
thereby allowing operation the throttle without
changing the shift position. When the shift posi-
tion is hold in neutral, the THROTTLE ONLY
LED comes on and when the switch is
released, the THROTTLE ONLY LED goes out.
The throttle only switch is only enabled when
the remote control handle is in the neutral posi-
tion.
NOTE:
If this switch is operated with the remote control
handle in a position other than neutral, the
THROTTLE ONLY LED blinks and a buzzer
sounds at the same time.
THROTTLE
ONLY
SELECT
THROTTLE
ONLY
SELECT
SELECT
1 LEVER
THROTTLE
ONLY
SELECT
Single top mount
remote control box
Flush mount
remote control box
Dual top mount remote control box
