Suzuki ACROSS 2020 Series, Руководство пользователя

Страница: 373 / 600

370
5-5. Using the driving support systems
The parking assist-sensor function
can be enabled/disabled on the
screen of the multi-information dis-
play. (

P.177)
When the parking assist-sensor func-
tion is disabled, the parking assist-sen-
sor OFF indicator (

P.163) illuminates
on the multi-information display.
To re-enable the system, select on
the multi-information display, select
and turn it on.
If the system is disabled, it will remain
off even if the power switch is turned to
ON after the power switch has been
turned off.
Turning parking assist-sen-
sor on/off
WARNING
■
Parking assist-sensor precau-
tions
Observe the following precautions.
Failing to do so may result in the vehi-
cle being unable to be driven safely
and possibly cause an accident.
●
Do not use the sensor at speeds in
excess of 10 km/h (6 mph).
●
The sensors’ detection areas and
reaction times are limited. When
moving forward or reversing, check
the areas surrounding the vehicle
(especially the sides of the vehicle)
for safety, and drive slowly, using
the brake to control the vehicle’s
speed.
●
Do not install accessories near the
bumpers as those areas are within
the sensors’ detection areas.
●
The area directly under the bum-
pers is not detected.
Thin posts or objects lower than the
sensor may not be detected when
approached, even if they have been
detected once.
■ When to disable the function
In the following situations, disable the
function as it may operate even
though there is no possibility of a colli-
sion.
● The vehicle is equipped with a com-
mercial fender pole, wireless
antenna or fog lights.
●
The front or rear bumper or a sen-
sor receives a strong impact.
● A non-genuine Suzuki suspension
(lowered suspension, etc.) is
installed.
●
Towing eyelets are installed.
● A backlit license plate is installed.
●
When using an automatic car wash
■ When using the Parking assist-
sensor
In the following situations, the system
may not function correctly due to a
sensor malfunction, etc. Have the
vehicle checked by a SUZUKI dealer
or a qualified workshop.
● The parking assist-sensor opera-
tion display flashes or shows con-
tinuously, and a beep sounds when
no objects are detected.
●
If the area around a sensor collides
with something, or is subjected to
strong impact.
● If the bumper or grille collides with
something.
●
If the display flashes or is displayed
continuously and a buzzer does not
sound, except when the mute func-
tion has been turned on.