Suzuki ACROSS 2020 Series, Руководство пользователя

Страница: 179 / 600

176
3-1. Instrument cluster
■
Electricity consumption
When the unit is set to “km/h”:
Electricity consumption is the consump-
tion rate of the electricity when EV driv-
ing is performed and equivalent to the
fuel consumption for the gasoline vehi-
cles. For this vehicle, electricity con-
sumed per 100 km (“kWh/100 km”) is
displayed as electricity consumption on
each screen.
When the unit is set to “MPH” (if
equipped):
Electricity consumption is the consump-
tion rate of the electricity when EV driv-
ing is performed and equivalent to the
fuel consumption for the gasoline vehi-
cles. For this vehicle, driven distance
per kWh of electricity consumed
(“miles/kWh”) is displayed as electricity
consumption on each screen.
■
EV driving range
●
When the air conditioning system is
operating,
is displayed next to
the EV driving range and the EV driv-
ing range with the air conditioning sys-
tem on is displayed.
● The EV driving range may shorten
even when not driving due to power
consumption by the system.
●
For details, refer to “EV driving range”
(

P.96)
■
Distance to empty
●
This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
●
When only a small amount of fuel is
added to the tank, the display may not
be updated. When refueling, turn the
power switch off. If the vehicle is refu-
eled without turning the power switch
off, the display may not be updated.
●
When “Refuel” is displayed, the
remaining fuel amount is low and the
distance that can be driven with the
remaining fuel cannot be calculated.
Refuel immediately.
■
ECO Accelerator Guidance/“Eco
Score” will not operate when
The ECO Accelerator Guidance/“Eco
Score” will not operate in the following
situations:
● The Hybrid System Indicator is not
operating.
● The vehicle is being driven using the
dynamic radar cruise control with full-
speed range.
■
Driving support system infor-
mation display
Select to display the operational
status of the following systems:
 LTA (Lane Tracing Assist)
(

P.323)
 Dynamic radar cruise control
with full-speed range (

P.337)
Select to enable selection of an
audio source or track on the dis-
play.
■
Drive information
2 items that are selected using the
“Drive Info Items” setting (average
speed, distance and total time) can
be displayed vertically.
The displayed information changes
according to the “Drive Info Type”
setting (since the system was
started or between resets).
Driving support system
information display
Audio system-linked display
Vehicle information display