Suzuki ACROSS 2020 Series, Руководство пользователя

Страница: 290 / 600

287
5
5-2. Driving procedures
D
riv
ing
force.
●
A lower shift range will provide greater
accelerating force and engine braking
force than a higher shift range, and
the engine revolutions will also
increase.
●
To prevent the engine from over-rev-
ving, upshifting may automatically
occur when the shift range is 3 or
lower.
●
When the shift range is 4 or lower,
holding the shift lever toward “+” sets
the shift range to 6.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may
sometimes be restricted. In some cir-
cumstances, downshifting may not be
possible even when the shift lever or
paddle shift switches is operated. (A
buzzer will sound twice.)
■ If the “S” indicator does not come
on or the “D” indicator is displayed
even after shifting the shift lever to
S
This may indicate a malfunction in the
transmission system. Have the vehicle
inspected by a SUZUKI dealer or a qual-
ified workshop immediately. (In this situ-
ation, the transmission will operate in
the same manner as when the shift lever
is in D.)
1
Right turn
2
Lane change to the right (move
the lever partway and release it)
The right hand signals will flash 3 times.
3
Lane change to the left (move
the lever partway and release it)
The left hand signals will flash 3 times.
4
Left turn
■
Turn signals can be operated when
The power switch is in ON.
■
If the indicator flashes faster than
usual
Check that a light bulb in the front or
rear turn signal lights has not burned
out.
Turn signal lever
Operating instructions