Suzuki 2005 DL650K5, Руководство по обслуживанию

Страница: 545 / 701

7) Disconnect the ECM coupler.
8) Check the continuity between W/G wire
A
and terminal
6
.
9) Also, check the continuity between B/Br wire
B
and terminal
B
.
%
$
HO2 sensor lead wire continuity: Continuity (
*
)
#
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
+
Tester knob indication: Continuity test (
*
)
Is the continuity OK?
Step 2 (When indicating C44/P0130:)
1) Connect the ECM coupler and HO2 sensor coupler.
2) Warm up the engine enough.
3) Measure the HO2 sensor output voltage between W/G wire
and B/Br wire, when idling condition.
$
HO2 sensor output voltage at idle speed:
0.4 V and less (
+
W/G –
-
B/Br)
4) If OK, then pinch the PAIR hose
1
with a proper hose clamp.
5) Measure the HO2 sensor output voltage while holding the
engine speed at 5 000 r/min.
$
HO2 sensor output voltage at 5 000 r/min:
0.6 V and more (
+
W/G –
-
B/Br)
#
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
'
Tester knob indication: Voltage (
(
)
When using the multi-circuit tester, do not strongly
touch the terminal of the ECM coupler with a needle
pointed tester probe to prevent the terminal damage
or terminal bend.
YES Go to Step 2. (When indicating C44/P0130:)
NO
W/G wire shorted to ground, or W/G or B/Br wire
open.
1
]
ECM coupler (Harness side)
2
V
2
DL650K7/AK7 (’07-MODEL) 13-41
PartShark.com
877-999-5686