Suzuki 1200 bandit, Руководство по обслуживанию

Страница: 92 / 447

1D-24 Engine Mechanical:
• Apply a small quantity of THREAD LOCK “1342” to
the CKP sensor cover bolts.
: Thread lock cement 99000–32050 (Thread
Lock Cement 1342 or equivalent)
• Install a new gasket and the CKP sensor cover (1).
• Install a new gasket washer (2) onto the CKP sensor
cover bolt as shown.
CAUTION
!
Replace the cover gasket and gasket washer
(2) with new ones.
Cylinder Head Cover
• Before installing the cylinder head cover gasket (1)
onto the cylinder head cover, apply a bond to the
groove in the cylinder head cover.
CAUTION
!
Replace the cylinder head cover gasket (1)
and oil nozzle gaskets (2) with new ones.
• Apply a bond to the four camshaft end caps of the
gasket as shown.
: Sealant 99000–31140 (SUZUKI Bond
1207B or equivalent)
• Place the cylinder head cover onto the cylinder head.
• Install the four gaskets onto each cylinder head cover
union bolt (3) and apply oil to thread and gasket
before tighten them to the specified torque.
CAUTION
!
Replace the gaskets with new ones to
prevent oil leakage.
Tightening torque
Cylinder head cover union bolt (a): 20 N·m (2.0
kgf-m, 14.5 lb-ft)
• Apply a small quantity of oil to the gaskets.
• Install the eight gaskets in the correct locations.
• Tighten the cylinder head cover bolts (4) to the
specified torque.
CAUTION
!
Replace the gaskets with new ones to
prevent oil leakage.
Tightening torque
Cylinder head cover bolt (b): 14 N·m (1.4 kgf-m,
10.0 lb-ft)
• Install all of the spark plugs.
1
2
I649G1140084-03
1
2
2
I649G1140351-01
(a)
3,
I649G1140086-04
(b)
4,
I649G1140087-04
(b)
4,
(a)
3,
(b)
4,
(b)
4,
(b)
4,
I649G1140356-01