- 12 -
© 2015 Suzo-Happ
Power Interface Module – Handles communication with host controller and distribution of
power to internal modules.
Memory Card – Provides easy upgrade of firmware.
Recycling Cassettes
– Store and recycle about 100 bills
Dispensing Cassette
– Dispense up to 20 bills
Path Switch
– Routes banknotes.
Chassis
– Holds and controls path switch, recycling & dispensing cassettes and facilitates
banknote routing.
Box Control Unit – Drives stacking mechanism in cash box.
Cash Box - Stacks and holds validated bills.
Housing
– Holds chassis, validating head, box controller & cash box and facilitates
communication between them.
For part numbers to modules specific to your device please refer to product user guide.
2.3.
Validating Head - MFLV-9013
The validating head is the key module featuring many subsystems.
Banknote alignment, validation and transport.
The validating head features a mechanism to align skewed banknotes and
banknotes of varying width. The guides adjust the width of the path so banknotes
are centered before entering the validation area. The validation system checks
optical, magnetic and dielectric properties of the banknotes.
Operation
In addition to regular host communication mode it features a service mode for
diagnostics and standalone operation.
DIP Switches
Convenient to select operation modes or denominations to be accepted
Memory Card
Provide easy and efficient way to perform software updates.
For troubleshooting and maintenance the validating head can be easily removed from
the housing. This is done by lifting the latch as indicated below.
