Suzohapp Bill to Bill XT Скачать руководство пользователя страница 5

Страница: 5 / 43

- 5 -

Introduction

This manual is designed to help with the integration of the Bill-to-Bill™ XT currency
management system.

Information provided in this manual includes

Dimensions and mounting instructions.

Specifications, configurations and accessories.

Settings and software updates.

Diagnostics.

1.1.

Safety Instructions

Please observe the below guidelines



Do not attempt to lift by bending forward. Use proper lifting technique as
applicable for heavier objects.



Do not lift or transport the device by chassis handle.



Make sure power connector is attached firmly before applying power.



Make sure power is switched off before attempting to remove any module.



Follow handling instructions enclosed with the unit



Follow specifications for operation, environmental and storage conditions.

1.2.

Product Overview

The Bill-to-Bill™ XT is a currency management system designed to validate and recycle
banknotes. About 300 banknotes may be stored and dispensed as change. The device has the
following features:

Handles banknotes 62 to 82 mm wide, and 125 to 180 mm long. This covers most of the
present day currencies.

Utilizes a mechanism to center and align banknotes of different widths.

Recycles up to 3 denominations to a total of 300 banknotes (in 3 recycling cassettes)

Dispenses multiple (max 20) banknotes in one operation

Supports easy firmware updates using Memory Card or through the host.

Offers a choice of bezels (standard, running lights, digital display and metal)

Secure lockable cash box (drop cassette) with 1000 bank note capacity.

Содержание Bill to Bill XT












































Результаты поиска

Содержание Bill to Bill XT

Отзывы:

Похожие инструкции для Bill to Bill XT

Бренды по названию

Популярные бренды

Suzohapp Bill to Bill XT, Руководство по эксплуатации

Результаты поиска

Содержание Bill to Bill XT

Отзывы:

Похожие инструкции для Bill to Bill XT

Бренды по названию

Популярные бренды