- 42 -
© 2015 Suzo-Happ
6.3.
Update Diagnostics
During the update process the bezel LEDs will blink red-green. The LEDs will turn to
steady state once the update is completed. In the event of an unsuccessful update, the
LED will blink red, with short green flashes. The following table lists errors related to
download process.
No of
Flashes
Error
Condition
Corrective Procedure
1
External
interface error
1. Verify that software is suitable for CCNET
download.
2. Repeat download process.
2
Memory card
CRC error
1. Turn power OFF, remove and reinsert the
memory card, turn power ON.
2. Replace memory card with a new one.
3
Incorrect data
in memory card
1. Verify that the software is right type for the
device.
2. Insert correct type of memory card.
4
Memory card is
not inserted
Ensure memory card is properly inserted.
5
Wrong type of
memory card
Insert the correct type of memory card.
6
Failure during
download
1. Turn power OFF, remove and reinsert the
memory card, turn power ON.
2. Replace memory card with a new one.
7
Operation error
1. Turn power OFF, remove and reinsert the
memory card, turn power ON.
2. Replace memory card with a new one.
7.
Operational Diagnostics
During operation Bill-to-Bill™XT may encounter conditions that may not allow it to
complete the task at hand. Such conditions are reported by sending an error code to the
host. The error code is displayed on the digital display bezel if the unit is equipped with
it. Refer to ‘Bill to Bill Error Codes’ document.
