CV1000
BILL VALIDATOR
Status LED
A Status LED assists in diagnosing the condition of
the Series CV1000. The following is a description
of the LED codes, their meanings, and suggested
remedial actions.
Signal
Meaning
Solution
LED ON
Indicates the unit is enabled and
ready to accept a bill.
No action necessary.
LED OFF
Indicates that no power has
been applied to the unit.
Check to ensure that power is applied.
1 Flash
Indicates that something is
obstructing the bill path.
Remove the magazine and LED housing;
inspect for foreign material
2 Flashes
Indicates the unit is not enabled.
Verify configuration.
Check the coin tube levels in the coin
changer. There must be coins in each tube.
Note: Many machines disable the bill
Validator if the machine door is open and
the door switch is not activated or if the
machine is out of product.
3 Flashes
Indicates that the bill path
needs cleaning for optimum
performance.
Remove the magazine and LED housing
and follow cleaning instructions to clean
the bill path.
4 Flashes
Indicates that something is
obstructing the cross channel
sensor.
Remove the LED housing and look at the
bill path on the housing and inside the unit
for foreign material; clean as necessary.
5 Flashes
Indicates that the magazine is
removed (the unit will not accept
bills without the magazine
attached).
Reinstall the magazine.
Slow
Flashes
Unit is defective.
Replace the unit.
Fast
Flashes
The magazine is full of money.
Remove money from the magazine.
Status LED
Configuration
Button
© MEI 2012
P/N 252657005
MEI
Suite 200, 3222 Phoenixville Pike
Malvern, Pa. 19355
Technical Support:
1-800-345-8172
www.meigroup.com
The CONLUX series CV1000 Bill Validator will
accept the Conlux Free vend, Conlux Value
vend, Conlux low cost Free vend coupons, the
Pepsi coupon, and the Aramark $1.00 coupons.
