5
Avoiding Physical Injury while Powered up and Emitting Light
WARNING
DO NOT LOOK DIRECTLY INTO THE OUTPUT OF THE LIGHT
APERTURE OF THE HIGH-POWER LED ASSEMBLY! Always direct
the output of the light aperture into the microscope using the
appropriate adapters, directed away from anyone’s eyes, and not
directed toward any reflective surface.
INFRARED AND ULTRAVIOLET RADIATION: The infrared radiation (and
ultraviolet radiation) generated by this lamp can cause significant skin burns and eye
damage.
Avoiding Physical Injury and Equipment Damage while Using High-Power LED
WARNING
Before removing the High-Power LED Assembly from the HPX
controller, make certain that the system is powered down. To
maximize LED life, run the system for five minutes with the LED off
before disconnecting the cooling hoses.
Other
Retain the original packaging for future transport of the instrument.
Sutter Instrument reserves the right to change specifications without prior notice.
This device is intended only for research purposes.
LAMBDA HPX HIGH-POWER LED LIGHT SOURCE SYSTEM OPERATION MANUAL – REV. 1.03E (20141208)
