Sutter Instrument Lambda 721, Руководство по эксплуатации

Страница: 26 / 62

LAMBDA 721 OPERATION MANUAL – REV. 1.10C (20210517)
14
Figure 3-17. Edit ring buffer query screen.
Knob (turn slowly) adjusts PWM down from 100% to 0%.
ON turns on LED (“ON” on screen); OFF turns it off (“OFF” on screen).
NEXT advances to the next LED without saving any adjustments to the power level.
ENTER saves any adjustment to the LED’s power level, and advances to the next LED.
Pressing ENTER on LED 7, exits Setup Mode and the Use Ring Buffer prompt is then
displayed.
3.1 Demo Mode
Figure 3-18. Demo Mode prompt screen.
Pressing YES displays the following screen. Pressing NO causes the display to loop back to
the Lambda 10 Mode prompt.
Figure 3-19. Enter Demo Mode prompt screen.
Pressing ENTER starts running the demo.
Figure 3-20. Demo Mode running screen.
Pressing OFF stops the Demo Mode from running, returning the display to the Lambda 10
Mode prompt.
LED#1 PWM =100%
OFF Amp = 1.0
USE DEMO MODE?
PRESS YES OR NO
PRESS ENTER TO
START DEMO MODE
DEMO RUNNING
OFF TO STOP