Sutter Instrument Lambda 721, Руководство по эксплуатации

Страница: 21 / 62

LAMBDA 721 OPERATION MANUAL – REV. 1.10C (20210517)
9
3. OPERATIONS
This chapter describes the operation of the Lambda 721. The locations of the individual
indicators, controls, and connectors are indicated in the following figure.
Figure 3-1. Locations of individual indicators, controls, and connectors on the Lambda 721 controller front panel.
Figure 3-2. Locations of power switch and individual connectors on the Lambda 721 controller rear panel.
3.1 Controls
3.1.1 Power Switch
Main power switch turns unit off/on.
3.2 Indicators
3.2.1 LED On/Off State Indicators
The LED on/off state indicators are located vertically, LED 1 through 7 top to down, on the
left side of the front panel.
3.3 Connectors
3.3.1 Light Beam Combiner Output
Provides the interface between the combined light source output to a microscope or liquid
light/fiber guide.
LED on/off state
indicators
Display
Light guide output
connector
NEXT
ON/OFF
YES & NO ENTER Selector Dial
USB Device
Receptacle
Power input module: Receptacle,
fuse, & switch
TTL Inputs for
LEDs 1 - 7
Ring Buffer
Strobe Control