P/N: 670-00020
8/25/08
16
Align switch enclosure with front edge of the work surface. Mark and prepare two holes in the location
provided by the switch enclosure.
Using appropriate screws, mount the switch to the work surface taking special care not to over tighten the
screws. Please note that the mounting screws are not provided with system or workstation kit.
Check mounting screws to ensure that the switch is secured.
9.2.4
Cable Connections
The motor controller ports are labeled and color coded to identify their function.
The switch plug is
blue
and corresponds with the
(HS)
switch port shown above. The motor cable plug is
black
and corresponds with the
(M1)
the motor port shown above.
