P/N: 670-00020
8/25/08
8
7.0
Cylinder & Top Bracket Installation
Before installing the top brackets, the pump should be placed in between the ATU legs in a secured
position. This will allow each cylinder to be inserted into the ATU legs without damaging the hydraulic
tubing.
Insert cylinder into ATU as shown. The plastic cylinder block will rest on structural tabs inside the ATU
leg.
Orient cylinder head so that tubing exits the ATU tubing cutout as shown.
Align top bracket with top of the ATU in the desired mounting configuration, cantilever or centered. Insert
cylinder head into top bracket mounting hole as shown.
Cantilever Configuration
Centered Configuration
