P/N: 670-00020
8/25/08
14
Detach the mounting plate from the bottom of the controller.
Align the mounting plate with the pencil line. Mark and prepare two mounting holes in the locations
provided by the mounting plate.
Fasten the mounting plate, taper side down, using mounting screws with screw heads that clear the
openings in the motor controller. To prevent breakage, do not over tighten the mounting screws. Please
note that mounting screws are not provided with system or workstation kit.
Slide the motor controller onto the mounting plate tabs so that they are fully engaged with motor controller
enclosure slots.
Mark two mounting holes in the motor controller keyway slots provided.
