SiO Controller
SUS Corporation
3-3
3.1.3 SiO-N1
No.
Part
Function
(1)
Power connector
Connect an AC adapter here to supply 24 V DC.
* Do not supply power from other connectors.
(2)
Power LED (green)
Lights when the power is ON.
(3)
RUN switch
Set this to RUN (right) to execute the program.
(4)
RUN LED (green)
Lights during RUN.
(5)
Input connectors
A connector used for input (e-CON (4-pole)
×
8 inputs)
(6)
Output connectors
A connector used for output (e-CON (3-pole)
×
8 outputs)
(7)
IN LED (red)
Lights when the input signal is ON (IN1 to IN8).
(8)
OUT LED (green)
Lights when the output signal is ON (OUT1 to OUT8).
(9)
USB connector
Connect the USB cable here (Micro-B USB 2.0).
(10)
T1
Sets Timer 1.
(11)
T2
Sets Timer 2.
(12)
Ground terminal
Connect this to the earth using an M3
×
4 screw.
(13)
GF mount hook
A hook for installation on a GF (N) rail.
(14)
ID switch
* Not used in single configuration
(15)
485 communication connector a
* Not used in single configuration
(16)
485 communication connector b
* Not used in single configuration
(2)
(9)
(7)
(5)
(6)
(8)
(1)
Version label
(10) (11)
(12)
(13)
(4)
(3)
(14)
(15)
(16)