SiO Controller
SUS Corporation
3-4
3.1.4 SiO3.2
No.
Part
Function
(1)
Power connector
Connect an AC adapter here to supply DC 24 V.
* Do not supply power from other connectors.
(2)
Power LED (green)
Lights when the power is ON.
(3)
RUN switch
Set this to RUN (right) to execute the program.
(4)
RUN LED (green)
Lights during RUN.
(5)
Input connectors
A connector used for input (e-CON (4-pole) x 3 inputs)
(6)
Output connectors
A connector used for output (e-CON (3-pole) x 2 outputs)
(7)
IN LED (red)
Lights when the input signal is ON (IN1 to 3).
(8)
OUT LED (green)
Lights when the output signal is ON (OUT1 to 2).
(9)
USB connector
Connect the USB cable here (Micro-B USB2.0).
(10)
Ground terminal
Connect this to the earth using a M3x4 screw.
(11)
GF mount hook
A hook for installation on a GF (N) rail.
(2)
(9)
(7)
(5)
(6)
(8)
(1)
Version label
(10)
(4)
(3)
(11)